Steam Crave Mini Robot RTA

• Brand: Steam Crave
• Unit: set
• Type: RTA
  
• Net Weight: 75(g)

The combined shipping cost will be calculated automatically by the system after you choose the shipping destination in the checkout step.

Steam Crave Mini Robot RTA comes to a diameter of 27mm, with such a large deck supporting the construction of a single coil, it is conceivable that it must be very easy to operate. Adapted with top airflow, you will get several air pins, such as 1.6mm,1.2mm, 0.8mm, and the blind one, you can mix and match these pins to meet your own demands for better flavor. Not only that, but 2 glass tubes are also ready for you, the straight one holds 2ml e-liquid while the bubble glass tube can be filled with 3mle-liquid, and both of them are matched with 510 drip tip and the top filling system. When the e-liquid in the container is low, you need to unscrew the top cap to expose the four filling ports, then you can easily refill it. As a rebuildable atomizer, we must prepare all the tools and accessories for unexpected needs.

Features

• Diameter Of 27mm

• Single Coil Built

• Top Airflow

• Exchangeable Air Pins: 2x 1.6 mm, 2x 1.2 mm, 2x 0.8 mm, 1 x blind included

• 2 Glass Tube

• Interchangeable 510 Delrin MTL Drip Tip

• Comfortable Top-fill With 4 Filling Openings

• Compact And Precisely Crafted Evaporator Chamber

• Fully Stocked Tools And Accessories

Size: 23* 41.35mm(27.85mm without drip tip)

Material: Stainless Steel & Glass

Capacity: 2ml&3ml

Drip Tip: 510 Delrin MTL Drip Tip

Thread: 510

1* Steam Crave Mini Robot MTL RTA(single coil deck and airflow pin φ1.2mm*2 fitted on)

2* φ1.6 mm air pin

2* φ0.8 mm air pin

1* blind pin

1* 3.0 ml bubble glass

1* 2.0 ml replacement glass

1* Spare 510 Delrin drip tip

1* replacement part bag (0-rings and screws)

1* Alley key

2* pre-built coil SS316L 0.45 Ohm, 7 wraps

1* Steam Crave sticker

1* instruction manual

Attention:As the manufacturer needs the serial number to provide a replacement, we highly recommend you keep the original packing box or take picture of the code before discarding it. Thank you!